Characteristics of the in-line automatic tapping machine. It is designed and manufactured according to the actual situation of the customer's product. The in-line automatic tapping machine is a special equipment designed and manufactured for automatic tapping and automatic separation and blanking after the product strip is unloaded. In addition to achieving basic tapping functions, the tapping machine has a daily production capacity of up to/above, while saving tapping manpower/above. It can also save the operating process of an ordinary vertical tapping machine. The product is fed in the form of a belt and connected to the machine. The machine material belt passes through the cutting die of the tapping machine, the feeding wheel, the material belt overlaps the edge and leaves the mechanism material wheel, and the material is fed in manual mode. The material belt is adjusted to the accurate position. When the belt passes through the tapping machine, the tapping is performed first (one tap will miss the tapping at the same time) The detection system detects whether there is any leakage of tapping teeth. If it occurs, it will immediately alarm and stop the machine teeth. At the same time, the cutting die will separate the product from the material belt (the once-cut product falls from the bottom of the machine platform and slides out the small box from the front of the machine along the guide trough. Bulk tapping machine operation diagram
Contact number Manager Zhou
Stamping punch line automatic tapping machine/Suzhou Automation/Zhejiang Automation